Surfactant in the gaseous phase II. Influence on stability of foams and thin liquid films

The influence of the vapors ofn-amyl orn-decyl alcohol on the stability of single thin liquid films, single bubbles, and foam columns was determined. It was found that the presence of surfactant vapors lowered the stability of foams and single foam films. The mechanism of the destabilizing action of the surfactant vapors on wet, dynamic foams under dynamic conditions is discussed. It is shown that the destabilizing action of the surfactant vapors is a further indication that surface elasticity forces are the main factor determining stability of wet, dynamic foams.     

Indirect detection in reversed-phase liquid chromatography: Ion-pair retention models for cations on polystyrene polymers

Summary The distribution equilibria of cationic compounds in reversed-phase chromatographic systems (ion-pair chromatography) have been studied on the basis of their effect on a detectable mobile phase component. The solid phase was a polystyrene-divinylbenzene copolymer and the detectable component, a quaternary ammonium ion, 1-methylpyridine. The solutes were mono- and divalent amines and quaternary ammonium ions. The cations can be retained by ion-pair adsorption and ion exchange. Expressions for the ion-pair retention of the solutes and the mobile phase cation (system peak) have been developed assuming Langmuir distribution of ion pairs to a solid phase with one kind of binding site. The validity of the expressions has been tested by evaluation of ion-pair distribution constants using non-linear curve fitting techniques. Good agreement for the constants of common ion pairs was obtained from different kinds of capacity ratio expressions. Ion exchange retention can appear beside ion-pair retention, and it has been observed in the pH range 1.6–6.1. The effect depends not only on cations in the mobile phase, but also on the nature of the buffering systems.     

The effect of alcoholic mobile phase modifiers on retention and stereoselectivity on a commercially available cellulose-based HPLC chiral stationary phase: An unexpected reversal in enantiometric elution order

Summary High pressure liquid chromatographic methods for the determination of diphenylmethane-4,4-diisocyanate (MDI) and toluene diisocyanate (TDI) in chemical products are described. The MDI- and TDI monomers were determined as their urea derivative formed by the reaction with 9-(methyl aminomethyl)-anthracene. Using these methods MDI- and TDI monomer concentrations have been determined in 55 chemical products: sealing waxes, insulating- and adhesive foam, hardener, primer, adhesives and surface coatings. The recovery of both MDI and TDI monomers from various types of chemical product was found to be 92–97%, and the relative standard deviations of the methods was <5% for all types of products.     

含VE微胶囊的制备及其控制释放性能研究

以天然维生素E（VE）为芯材，利用Shirasu porous glass (SPG) 膜乳化结合液中干燥法，制备了粒径单分散的聚苯乙烯（PS）微胶囊.微胶囊的粒径为膜孔径的4倍，粒径单分散系数CV小于0.2.考察了改变PS和VE的比例及微胶囊的粒径对控制释放性能的影响.     

Pressurized liquid extracts from Spirulina platensis microalga. Determination of their antioxidant activity and preliminary analysis by micellar electrokinetic chromatography

In this work, different extracts from the microalga Spirulina platensis are obtained using pressurized liquid extraction (PLE) and four different solvents (hexane, light petroleum, ethanol and water). Different extraction temperatures (115 and 170 degrees C) were tested using extraction times ranging from 9 to 15 min. The antioxidant activity of the different extracts is determined by means of an in vitro assay using a free radical method. Moreover, a new and fast method is developed using micellar electrokinetic chromatography with diode array detection (MEKC-DAD) to provide a preliminary analysis on the composition of the extracts. This combined application (i.e., in vitro assays plus MEKC-DAD) allowed the fast characterization of the extracts based on their antioxidant activity and the UV-vis spectra of the different compounds found in the extracts. To our knowledge, this work shows for the first time the great possibilities of the combined use of PLE-in vitro assay-MEKC-DAD to investigate natural sources of antioxidants.     

RP-HPLC study of redox equilibria in vanadium-PAR binary and ternary systems: Direct determination of vanadium in steel

The reversed-phase high-performance liquid Chromatographic (RP-HPLC) behaviour of the binary chelates of V(V) and V(IV) with 4-(2-pyridylazo) resorcinol (PAR) and ternary chelates of vanadium with PAR and auxiliary ligands: hydrogen peroxide, hydroxylamine, tartrate and citrate were studied using a C₁₈ column. The complex double-peak chromatograms of V(IV)/V(V)-PAR systems were studied and the origin of each peak was proved. Vanadium in ternary systems with PAR and hydrogen peroxide was found exclusively in V(V)-H₂O₂-PAR complex (single peak on the chromatogram) despite its initial oxidation state. The double role of hydroxylamine (complex agent and reductor) in vanadium systems with PAR was confirmed: in the V(V) system three species were identified (V(V)-PAR, V(V)-NH₂OH-PAR and V(IV)-PAR), but in the V(IV) system only two: V(IV)-PAR and V(V)-NH₂OH-PAR. Citrate and tartrate giving single peak were found as auxiliary ligands in ternary V(V) systems of analytical importance. Due to its masking potential towards iron (III) ions, citrate was chosen as the most suitable third component of a ternary vanadium system with PAR, to form the basis of an RP-HPLC method for direct determination of V in steel.     

Insight into the cation–anion interaction in 1,1,3,3-tetramethylguanidinium lactate ionic liquid

In order to deepen the understanding of cation–anion interaction in ionic liquids (ILs), the structure and interionic interaction of 1,1,3,3-tetramethylguanidinium lactate ([tmg][L]) ion pair, including stable configuration, hydrogen bond, frontier molecular orbital, electron density, ion interaction energy and charge transfer, are studied by using ab initio calculations. It is found that more charge-localized character of [tmg][L], especially the C1 carbocation on [tmg]⁺, and the intermolecular –NH₂-associated hydrogen bonds can substantially increase the cation–anion interaction, the interaction energy is 65.3–109.3 kJ/mol higher than that of 1-n-butyl-3-methylimidazolium-based ILs. It is also found that the frontier molecular orbitals, i.e., the HOMO, HOMO + 1 of [L]⁻ and the LUMO, LUMO + 1 of [tmg]⁺, can effectively interact and more charges are transferred between cation and anion. Based on the above results, the physical property of ILs is discussed.     

Stereoselectivity of (−)-(1<Emphasis Type="Italic">R</Emphasis>,2<Emphasis Type="Italic">S</Emphasis>)-2-methylamino-1-phenylpropan-1-ol preparation

Stereoselectivity of reductive amination of (R)-1-hydroxy-1-phenylpropan-2-one by methylamine was studied. From the four isomers possible, only two are produced by this reaction. These are marked as (−)-(1R,2S)-ephedrine (desired product) and (+)-(1S,2R)-ephedrine. The reaction stereoselectivity depends both on the type of the catalyst and reaction conditions. The most suitable type is the supported platinum. However, this catalyst rapidly deactivates. With a decreasing activity of Pt catalyst, the stereoselectivity decreases. It is also decreased during the production of the second liquid phase (water) in the reaction mixture.     

Synthesis, characterization and thermal properties of small R2R2NX-type quaternary ammonium halides

Twenty-one R₂R^′₂N⁺X⁻ -type (R=methyl or ethyl, R^′=alkyl, X=Br or I) quaternary ammonium (QA) halides have been prepared by using a novel one-pot synthetic route in which a formamide (dimethyl-, diethylformamide, etc.) is treated with alkyl halide in the presence of sodium or potassium carbonate. The formation of QA halides was verified with ¹H-NMR, ¹³C-NMR, MS and elemental analysis. The crystal structures of four QA halides (two bromide and two iodide) were determined using X-ray single crystal diffraction, and the powder diffraction method was used to study the structural similarities between the single crystal and microcrystalline bulk material. The thermal properties of all compounds were studied using TG/DTA and DSC methods. The smallest compounds decomposed during or before melting. The decreasing trend of melting points was observed when the alkyl chain length was increased. The liquid ranges of 120-180 °C were observed for compounds with 5-6 carbon atoms in the alkyl chain. The low melting points and wide liquid ranges suggest potential applicability of these compounds for example as ionic liquids precursors.     

Synthesis and characterization of novel epoxy monomers and liquid crystal thermosets

Four new epoxy monomers have been synthesized and characterized as part of a program to prepare novel liquid crystal thermoset (LCT) materials. Three of the new epoxy monomers contained a biphenyl mesogen and were not liquid crystalline (LC). The remaining epoxy monomer, which contained a 1,4-dibenzoyloxybenzene mesogen, was synthesized in an overall yield of 30% and displayed a broad (83°C) nematic liquid crystalline phase. The new liquid crystalline epoxy monomer was cured at 120°C and postcured at 175°C with a stoichiometric amount of 1,4-phenylenediamine. The thermal transitions of the resulting LCT were studied by differential scanning calorimetry (DSC), polarized light optical microscopy (POM), thermomechanical analysis (TMA), and wide angle x-ray diffraction (WAXD) as a function of cure time and temperature. A process characterization diagram was constructed which shows that LCTs based on this new LC monomer can be processed in the liquid crystalline phase over a broad range of times and temperatures. Qualitative agreement with previous epoxy LCT results was found, as LCT's with smectic phases and without clearing temperatures were observed at long cure times (high crosslink densities), whereas nematic phases with clearing temperatures predominated in networks at short cure times (low crosslink densities). © 1993 John Wiley & Sons, Inc.